Introduction
|
This solar module laminator is a semi-automatic machine. It is equipped with Siemens PLC control. And
different parameters can be set according to the different technical requirements of the solar module. Vacuum
is controllable and multipoint temperature control is available. |
Benefit
|
1.Laminating system is the upper and lower chambers structure, laminating cavity using a special process
of welding and high vacuum leak-proof sealing technology to stabilize laminating effect; |
2.The upper cavity adopts back-flip opening method to ensure automatic operation,easy operation
and high reliability. Cover fold-proof design can guarantee the life of membrane sheet and easy
replacement; |
3.Heating plate is 55mm thick metal plate after vertical drilling, grinding production process as a whole, the
surface roughness is less than 0.1mm; |
4.The whole machine adopts Siemens PLC and touch screen control, realizing of human machine communication interface, lamination time and process parameters such as temperature, pressure,
and vacuum time can be set and modified at any time anywhere on the touch screen for easy monitoring. |
5.Adopt 2X-70 vacuum pump. The time for vacuumizing is 5~7 minutes, stable vacuum degree up to 20-50Pa. Air bag maximum inflation pressure is 1 atmosphere, and can be adjusted in the range of 0.5~ 1 bar.
If the vacuum does’t reach the vacuum standard in set time, it will alarm. |
6. There are different alarm system,sensor, and emergency buttons to ensure the correct operation and
safety of the operator. |
Specifications
|
Useful Laminating Area |
2400×2200mm |
Dimension |
2650x2920x1400mm |
Weight |
7500kg |
Control mode |
Automatic/manual |
Heating method |
oil heating |
Temperature
control method |
Siemens smart
PID control system |
Work temperature rage |
130~180℃ |
Temperature
uniformity |
±1.2℃ multipoint
temperature control |
Precision of
temperature control |
≤±0.4℃ |
Compressed
air pressure |
0.6~0.8MPa |
Inflation rate |
0~70L/S adjustable |
Vacuumizing rate |
70L/S |
compressed air flow rate |
400~800L/min |
Time of vacuumizing |
0--7min Adjustable |
Vacuum degree
when lamination |
50~20Pa |
Time for one
working cycle |
18~20min adjustable |
Unevenness
of heating plate |
≤30μm/㎡ |
Installation of the
membrane sheet |
Frame pull rod fixation |
Vacuum pump |
2X-70 |
Magnetic valve |
SMC |